20mm
SS207-5AX Sliding Headstock
A 20mm, B-axis Sliding Headstock Swiss Type Lathe, and is the ultimate swiss turn for complex small parts to perform continuous live cutting on a Servo-driven B-axis. The SS207 can have three front and three rear on the B-axis and coordinate them with the C-axis for precise angles and contours. Capable of drilling, tapping, and end milling at any angle with 35 tool positions, 13 live tool positions, and a live tool speed of 8,000 rpm.
32mm
SS327-III-5AX 32mm
A 32mm, B-axis sliding headstock swiss type lathe, for complex-shaped parts. The SS327-5AX is a Servo-driven B-axis to cut complex parts in a single setup. The B-axis has four front and four rear live tools that can machine with the C-axis for precise angle cutting and contours. Capable of drilling, tapping, and end milling at any angle. The SS327-5ax is the ultimate Swiss type lathe that can cut multiple angles with the same tool so it decreases the number of tools required. This machine has a max headstock stroke with guide bushing of 320 mm / 12.59″ and without a guide bushing of 70mm / 2.74″, and 38 tool positions, and 16 live tool positions and a live tool speed of 5,000 rpm (B-axis tools), and 6,000 rpm on the other.
38mm
SS38MH-5AX Sliding Headstock
A 38mm, chucker-convertible sliding headstock lathe with B-axis, has full 5-axis simultaneous machining for high accuracy and heavy-duty cutting. This machine is the first Tsugami of it’s kind and it is unique with the capability of backworking overlap with live tools to allow more than one tool in the cut to reduce your cycle times. With extreme versatility with 52 tools, a 40 tool magazine, 10 tools on the back tool post, and an optional 2 tools on the deep hold drill holder. The SS38MH-5Ax has a live tool speed of 6,000 rpm on backworking, and 20,000 RPM on the tool spindle.