Sharp 3323 VERTICAL MACHINING CENTER

[click image for larger view]

FEATURES:

Small foot print machine designed for heavy duty cutting
33.5” x 23.6” x 22” travel, machine weight over 16,000 lbs
Cross travel slideways twice the width of similar size machines for extra stability under heavy duty machining conditions
Induction hardened and ground box ways (X,Y,Z ) for rigidity
Certified MEEHANITE castings, fully ribbed
Fanuc control with 0i-mate as standard, 0i-MC, 21i, and 18i as optional
Fanuc digital AC servo, motors and drives
High precision preloaded C3 grade ball screws on all 3 axes
Available with CAT 40 spindle
ZF geared headed spindle (opt) available for extra heavy cutting conditions
Spindle motor of 10/15 hp (15/20hp opt) for CAT40
8,000 rpm (10,000 rpm opt) for CAT 40 spindle,
Built-in spindle cooling system
Chip flushing nozzles under both sides of work table
Umbrella or side mount type Auto Tool Change, 20T, 24T, 32T, or 40T
ATC has air reserve tank serves to prevent tool jamming when air pressure is low

SPECIFICATIONS:

	SV-3323
Travel Size (x, y, z) (displayed in inches)	33.5”x 23.6”x 22”
Table Size (displayed in inches)	41.3”x 23.6”
Maximum Table Load	2,420 (lbs.)
Table T-Slot Size	6" x 0.7” x 3.9”
Spindle Center to Column (throat)	25.6”
Spindle Nose to Table Surface	3.9”- 29.9”
Floor To Table	33.6”
Spindle Speed (standard)	8,000 (rpm)
Spindle Speed (optional)	10,000 (rpm)
Taper	CAT- 40
Spindle Motor (hp)	10/15 hp
Spindle Motor (hp) (optional)	15/20 hp
Cutting Feed Rate (all axes) (max ipm)	393 ipm (10M/min)
Rapid Traverse (x,y)	787 ipm (20M/min)
Rapid Traverse (z)	590 ipm (15M/min)
Axis Motor (Fanuc), (X, Y, Z)	2.4, 4.5, 5.4 HP
Max Thrust Rating X , Y, Z Axis Motor	12 Nm, 22 Nm, 30 Nm
Ball Screw Diameter (X / Y, Z ) & Pitch	40 / 45 mm x 10mm
Tool Change System (number of tools) (std)	Umbrella /20
Tool Change System (number of tools) (opt)	Side Mount /24,32,40
Adjacent Tool Diameter (max. in.)	3.9”, 3.7”, 3”
Tool Weight (max. lbs.)	15 lb
Selection Method	Bi-Directional
Tool Change Time, tool to tool, Umbrella/Side Mount	7.5 sec /3.5 sec
Tool Change Time, chip to chip, Umbrella/Side Mount	11 sec /5.5 sec
FANUC systems, standard	0i-mate
FANUC systems, optional	0i-MC, 21i-MB, 18i-MB
Positioning Accuracy	+/- .0001” (0.003mm)
Repeatability Accuracy	+/- .0001” (0.003mm)
General Power	220V / 3 phase / 60Hz, 25 KVA
Air Requirement (psi)	6 CFM @ 100 PSI
Dimensions and Weight
Machine Dimensions	100”x 86” x 102/114”
Approximate Weight	16,100 Lbs

STANDARD ACCESSORIES:

OPTIONAL ACCESSORIES:

Fanuc 0i-MC control with 7.2” screen
Fanuc 21i-MB control with 10.4” color screen
Fanuc 18i-MB control with 10.4” color screen, solid graphics
15/20 HP spindle motor for CAT 40 spindle (Fanuc alpha 12i motor)
ZF gearbox for 25 HP motor or under, include chiller, max. 6,000 rpm
ZF gearbox for 25 HP motor or over, include chiller, max. 6,000 rpm
10,000 rpm spindle with spindle chiller for CAT 40 (must install CTS)
Coolant Through Spindle (CTS) (20 bar)
Coolant Through Spindle (CTS) (50 bar)
Spindle air blow
Umbrella type ATC , 24 tools, for CAT 40 spindle
Side mount type ATC, 32 tools, for CAT 40 spindle
Side mount type ATC, 40 tools, for CAT 40 spindle
4th axis (indexer) pre-wiring package (cables, pneumatic pipes installed), not include motor and amp
Flat Type Chip Conveyor
Heat Exchanger
20KVA Transformer (For Power Other Than 220V)
Oil Skimmer
Mist Collector
Dust Collector
Heat Exchanger
Auto power off
Ai Nano Risc Board (18i-MB Control)
Ethernet/Data Server 256 MB (0i-MC / 18i-MB Controls)
Ethernet/Data Server 512 MB (0i-MC / 18i-MB Controls)
Ethernet/Data Server 1 GB (0i-MC / 18i-MB Controls)
Renishaw OMP-40 Part Probe
Renishaw TS-27R Tool Setter
Heidenhain iTNC 530 or TNC 410 Control .
Siemens 810DE or 840DE Control

Options are Factory Installed