An Ultra-High Performance Horizontal Machining Center especially
designed to ramp-up productivity on a wide range of materials typically
machined within the automotive and information technology industries.
Key design elements emphasize speed, power, reliable accuracy and high
uptime, shift after shift.
JE80S Machine Specifications
|
| AXIS TRAVEL |
X axis
Y axis
Z axis
Top of table-spindle cline
Cline table-face of spindle |
31.5
31.5
31.5
2.8-34.3
5.9-37.4 |
| FEEDRATES |
Rapid traverse(X/Y/Z)
Cutting feedrate
Accel. & Decel.
Feed motors, AC servo, hp |
3,546/min.
0 -3,546/min.
1.0 g (10M/sec_)
7.4 |
| SPINDLE |
Spindle Taper
Spindle horsepower/type
Full power developed at
Starting torque
Rigid tapping (max. rpm) |
CAT40
29.5 dual range/integral
5,000 rpm
86 ft. lbs
4,000 rpm
|
| ACCURACY |
Positioning, full stroke,
Repeatability |
X/Y/Z 0.000080
+/- 0.000040 |
| AUTOMATIC TOOL CHANGER |
Magazine capacity
Max. tool diameter/
adj. pockets empty
Max. tool length
Max. tool weight
Tool change time (tool-tool)
Tool change time (chip-chip) |
60 tools
2.95
5.7
13.7
17.6 lbs.
1.2 sec.
3.0 sec. |
| AUTOMATIC PALLET CHANGER |
Pallet size
Max. load, lbs. per side
Min. index angle
Table index time |
19.7 x 19.7
1,100
.001 degree
7 seconds |
| MACHINE ELECTRICS |
| AC 200/220V +/-10-15%;50-60Hz |
| MACHINE DIMENSIONS & WEIGHTS |
WxDxH 110 x 239 x 116
(length includes chip conveyor)
Weight 24,200 Lbs. |
| |
| Note: specifications and equipment supplied
subject to change without notice |
