JE50S Horizontal Machining Center
An compact, Ultra-performance Horizontal Machining Center for stand
alone production, or for integration in lean lines or agile machining
systems. Key design elements emphasize speed, power, reliable accuracy,
and high uptime, shift after shift.
JE50S Machine Specifications
|
| AXIS TRAVEL |
X axis
Y axis
Z axis
Top of table-spindle cline
Cline table-face of spindle |
19.7
19.7
19.7
9.85-29.55
5.9-25.6 |
| FEEDRATES |
Rapid traverse(X/Y/Z)
Cutting feedrate
Acceleration & decel. (X,Y)
Acceleration & decel. (Z)
Feed motors, AC servo, hp |
2,362/min.
.04-591/min.
0.61G
1.2G
5 (X/Y/Z) |
| THRUST |
X & Y axes
Z axis |
235 lbs.
675 lbs. |
| SPINDLE |
Spindle Taper
Spindle bearing diameter
Spindle horsepower/type
Full power developed at
Spindle ramp-up time/rpm
Starting torque
Rigid tapping (max. rpm)
Lubrication type |
CAT40
2.56
20 (peak) /direct
3,000rpm
1.8 sec./12,000
35 ft. lbs.
4,000
oil mist |
| AUTOMATIC TOOL CHANGER |
Magazine capacity
Max. tool diameter
Max. tool length
Max. tool weight
Tool change time (tool-tool)
Tool change time (chip-chip) |
40
2.95
13.78
22 lbs.
1.5 sec.
3.1 sec. |
| ROTARY TABLE |
Size
Max. load, lbs.
Min. index angle
Table index time
|
15.7 x 15.7
1430
.001 degrees
1sec/90 degrees |
| MACHINE ELECTRICS |
MACHINE ELECTRICS
AC200/220V +/-10-15%; 50-60Hz; 29 KVA |
| MACHINE DIMENSIONS AND WEIGHTS |
L x W x H
Weight |
151 x 78 x 110
15000lbs. |
| |
| Note: specifications and equipment supplied
subject to change without notice |
| Standard Equipment |
Fanuc 18iM control
Fanuc 20hp spindle drive
Fanuc axis servo drives
12,000 rpm direct drive spindle
Ceramic spindle bearings, oil mist lubrication
CAT40 taper
40 tool automatic tool changer
Lift-up chip conveyor
Dyna Scale ballscrew compensation-all axes
NC rotary table
Coolant thru spindle - 256 psi
Ceiling shower coolant
Bed flush coolant
Halogen work light
Complete chip and coolant guarding
Door interlocks
Three color work status lights
Inch/metric switchability
Additional M functions, 2 pairs
Spindle override
Program memory: 233 meters
RS232-C port
Helical interpolation
Standard tools for machine
Leveling blocks |
| Options Available |
2APC
HSK63A spindle taper
Spindle chiller
Additional part program storage
Tool life management
Automatic tool length measurement and breakage detection
Part probe |
|
 |
