The Enshu JE30S is a compact, High Performance Traveling Column
Horizontal Machining Center designed to operate as a stand-alone
machine, or to be integrated in cells, lean lines or agile manufacturing
systems. The JE30S offers the highest degree of reliability available in
its class.
JE30S Machine Specifications
|
| AXIS TRAVEL |
X axis travel
Y axis travel
Z axis travel
Distance from top of table to spindle nose
Distance from table center to spindle nose
|
19.7”
13.8”
11.8”
3.9”-17.7”
4.7”-16.5” |
| FEEDRATES |
Rapid Traverse (X/Y/Z)
Cutting Feedrate (X/Y/Z) |
2,362 ipm
0-591 ipm |
| SPINDLE |
Spindle taper
Spindle bearing diameter
Spindle speed range
Spindle drive type
Spindle ramp-up time (rpm)
Spindle horsepower (15 min./ cont.)
Spindle torque
Rigid tapping, max. rpm
Lubrication type
|
BT30
1.97”
40-13,000rpm
Direct
0.38 sec. (13,000)
7.4/4.0
13 ft. lbs
8,000
Perm. grease pack |
| ACCURACY |
Positioning (full stroke)
Repeatability |
0.00016”
+/-0.000040 |
| FEED MOTORS |
Feed motor, AC servos-X&Y
Feed motor, AC servo- Z |
5 hp
1.4 hp |
| AUTOMATIC TOOL CHANGER |
Tool change method
Tool shank type
Tool storage capacity (optional)
Max. tool diameter
Max. tool length
Max. tool weight
Tool change time tool-tool
Tool change time-chip-chip |
Armless / random-bi-directional
BT30
30
3”
7.9”
6.6 lbs.
1.7 sec.
2.8 sec. |
| AUTOMATIC PALLET CHANGER |
Table work surface
Max. table load
Distance, floor to top of table
Number of pallets
Pallet indexing
Indexing speed
Pallet change method
Pallet change time |
12.6” x 12.6”
440 lbs
42”
2
0.001 deg.
0.90 sec. – 90 deg.
Rotating
4.5 sec. |
| TANK CAPACITIES |
Cutting fluid
Hydraulic fluid
Lubrication |
80 gal.
3.9 gal.
0.5 gal. |
| POWER SOURCES |
Electric power supply
Max. power consumption
Compressed air |
200V AC +/-10%, 3ph/60Hz
19 KVA
57-114 psi |
| MACHINE |
Weight 9,900 lbs
Size (L x W x H) 187” X 69” X 98” |
| |
| Note: specifications and equipment supplied
subject to change without notice |
