EV450 Vertical Machining Center
The Enshu EV450 is a high-performance, traveling-column,
full-process vertical spindle machining center designed for
maximum efficiency at both ends of the job lot size spectrum.
The EV450 is well suited for machining tough ferrous castings as
well as non-ferrous die castings.
EV450 Machine Specifications
|
| AXIS TRAVEL |
X Axis Travel
Y Axis Travel
Z Axis Travel
Distance from top of table to
spindle nose |
22"
17.7"
18.1"
7.9" - 26" |
| FEEDRATES |
Rapid Traverse (X/Y/Z)
Jog Feedrate
Acceleration (X/Y/Z) |
1575 ipm
0.4 - 591 ipm
0.5G |
| TABLE |
Table Work Surface
Table Surface Design
Maximum Table Load
Distance from Floor to Top of Table |
31.5" x 17.7"
Three parallel T-slots, "X" axis
0.7" wide
1100 lbs.
31.5" |
| SPINDLE |
Spindle Taper
Spindle Speed Range
Spindle Horsepower (15 min/cont)
Spindle Torque
Rigid tapping (max. rpm) |
CT40
40-10,000 RPM
10.2 / 5.0HP
70 ft/lbs.
4,000 RPM |
| ACCURACY |
Positioning (full stroke, all axis)
Repeatability X/Y/Z |
0.0002"
± 0.00012" |
| AUTOMATIC TOOL CHANGER |
Tool Shank Type
Tool Storage Capacity
Max. tool diameter (adj. Pocket
empty)
Max. tool length
Max. tool weight
Tool change time (tool-tool)
Tool change time (chip-chip) |
CT40
20 tools
3.5" (5.7")
11.8"
17.6 lbs.
1.0 sec
3.5 sec |
| AUTOMATIC PALLET CHANGER (OPTIONAL)
|
Pallet Work Surface
Maximum Pallet Load
Distance from Table to Spindle Nose
Distance from Front of Column to Spindle Center
Distance from Floor to Pallet Surface
Table Surface Design
Number of Pallets
Pallet Change Method
Pallet Change Time |
30.9" x 15.7"
550 lbs.
7.9" - 26"
20.1"
31.5"
Three parallel T-slots, "X" axis
0.7" wide
2
Rotary type
4.8 sec |
| MACHINE ELECTRICS |
| Electric Power Supply
Max Power Consumption
Compressed Air |
200V AC ±10% 3-ph 50/60Hx ±2%
220V AC ±10% 3-ph 60Hx ±2%
19.2KVA
71.1-113.8psi |
| MACHINE DIMENSIONS &
WEIGHTS |
Weight
Size (WxDxH) |
11,790 lbs.
83" x 96" x 106" |
| |
| Note: specifications and equipment
supplied subject to change without notice |
| Standard Equipment |
Bed flush coolant system
Preparation for coolant through the spindle
Manual pulse generator
Spindle speed, feedrate and rapid traverse overrides
Halogen work light
Three stage machine status stack light
Door interlock
One set "M" codes (one pair)
RS232C Port
Program memory: 233 meters (Fanuc); 390 meters (Yasnac)
Helical interpolation
Work coordinate expansion (48 sets)- with 2-APC model
only
Inch/metric switch capability
Splash guard with manually operated door
Standard tools for machine
Leveling bolts and blocks |
| Options Available |
2 APC
Coolant through spindle (256 psi)
Lift-up chip conveyor
Part probe
Automatic tool breakage detection
Auto tool length measurement
Custom macro "B" (Fanuc)
Part program storage - 320m, 640m or 1280m
Program restart
Tool length measurement
Tool life management
Tool offset addition - 64 to 1199 pairs, depending on
control
Work coordinate system - 48 pairs
Coordinate system rotation |
|
 |
Click here to request
information about Enshu
